- Street Glow Neon Accent Lighting Kit
- National Cycle Contoured Windshields
- Foldable Traction Units
- GTS High-Profile Omni-Gard Wraparound Deflectors
- Organizer Tote
- Accel Kool Flow Cold Air Induction Systems
- Grizzly Overrider Bars
- H1 Bulbs
- United States Flag Decal Set
- 9006 Bulbs
- Custom-Fit Hand Deflectors
- Big-bore Piston and Cylinder Kit
|
STROBE ACCENT LIGHT Small enoughto mount anywhere you want a unique pulsating light Rugged Lexan� construction survives rough travel Features built-in transformer Easily installs anywhere. Plugs into cigarette lighter or permanently wires to 12-volt system (only 2 wires to hook up). Approximately 1-5/8"W x 2-3/4"L x 1-3/8"D. Limited lifetime warranty. Brackets, hardware and instructions included. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models |
|
HEAVY-DUTY STRUT BAR Looks great while firming up your suspension A must for hard cornering or auto-crossing Superior to standard aluminum bars than can bend over time Choice of raw stainless steel or gun-metal powder-coated mild steel Dual-tube bar features precisionTIG welds and dimple die brace plate. Mounts to OE-specified points�heavy-duty hardware included. Applications:2001-2003 Subaru WRX,2001-2003 Subaru WRX |
|
REAR-VIEW MIRRORS Replace damaged original mirrors to restore driving safety Mount to original bolt holes�no drilling required Applications: Jeep Wrangler with original half doors, Jeep Wrangler with original half doors,Jeep Wrangler with original half doors, Jeep Wrangler with original half doors, Jeep Wrangler with original half doors |
|
RACING NUMBER Big die-cut gray vinyl racing number on clear vinyl Support yourfavorite race-car driver! Easy peel-n-stick application on window or painted surface Approximately 10-1/4" x 6-1/4". Applications: All Makes All Models |
|
RUBICON� RACING SUSPENSION SEATS Engineered and built for racing and extreme off-roading! Provide the safety, comfort, support and style demanded by the serious rock crawler These performance seats offer everything the hardcore enthusiast could want Made in the USA by a leader in the field with careful attention given to every design, construction and safety feature. You'll like their looks, the way they cradle you and the hip and upper torso support that's so important on those off-road ventures. Easy bolt-in installation; Mounting Kit required for bucket seat installation in 1997-2002 Wrangler TJ (SKU# 48ZX8979AF for driver's side; SKU# 48ZX8980RF for passenger's side). Seats not intended for street or highway use. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in FE are factory shipped by truck freight. BUILT FOR RACING! (See numbered diagram at left) 1. Steel Frame. 3/4" mild steel tubing, mandrel bent into shape and Mig welded for superior strength. Rugged .065"thick wall (HREW1010). 2. Suspension Liner. Nylon-coated mesh liner is ultra strong, durable�and porous to let any moisture pass through. Secured to frame with military-specification nylon parachute cord. 3. Foam Padding. Polyurethane foam of different thicknesses/densities is laminated to the liner and built up to achieve (and maintain) the desired shape. 4. Schukra Lumbar Supports. Fitted to the seat frame, they provide up to 3" of infinitely adjustable lumbar support. Help you stay in your seat�no matter what kind of ride. 5. Adjustment Knob. Attaches to left or right side to suit your style. 6. Premium Upholstery. Black fabric center insert with tight-woven fabric side panels and top-quality Naugahyde� vinyl outside trim. Side panels and trim are available in complementary color combinations. All seats come with black vinyl piping. 7. Stress Points. Double lapped and grommeted for maximum strength. 8. Seat-belt Slots. Built-in slots for 5-point harness plus loops to keep belt in place. 9. Headrest. Built in for strength. Applications: Jeep Wrangler YJ, Jeep CJ5, Jeep CJ7 |
|
PERFORMANCE IGNITION SYSTEM KITS Kits combine the best performance, power, precision and control in one super-tough package! The best-bang-for-your-buck ignitions ever offered! Deliver up to 10,000 RPM for 8-cylinder vehicles,up to 20,0000 RPM for 4-cylinder vehicles with NO HIGH-END DROP OFF! Systems ensure the most complete and sustained ignition for easier starts, stronger pulling, lower ETs, smoother idle, reduced plug fouling and crisper throttle response. Capacitive discharge ignitions with HEXFET solid-state firing technology and silicone-controlled rectifiers provide consistent, reliable and stable multisparking across 22? of crankshaft rotation?the spark interval stability of these analog ignitions are superior to most digital ignitions. Perfect for race classes that prohibit digital engine controls. All circuits are encapsulated in a high-tech composite material to protect against extreme g-load impacts, hard acceleration and temperature extremes. Kits can be submerged in water for long periods. Special internal filters and low internal RFI reflectivity of the aluminum housing eliminate interference and line noise common to other ignitions. With connections for mag pick-up triggers, dedicated tachometer/EFI output lead and conventional input signal lead. All supply leads are soldered for maximum strength and corrosion resistance and feature built-in over-current protection. For 12-volt negative-ground systems. Due to the extremely high output of these systems, Jacobs recommends use of the C-4 coil (sold separately) to prevent overloading original-equipment coil. Applications: All Makes All Models |
|
ALTERNATOR BRACKET SETS Include upper and lower mounting brackets (where required)Bolt on easily�no modifications required For American vehicles Duplicate-of-original equipment design. Look great with other chrome items. Applications: Dodge All Models w/273; 318; 340 and 360 Engines (exc. w/100-amp Alternator or Air Conditioning); 2-pc. Set (Top and Bottom), Chrysler All Models w/273; 318; 340 and 360 Engines (exc. w/100-amp Alternator or Air Conditioning); 2-pc. Set (Top and Bottom), Plymouth All Models w/273; 318; 340 and 360 Engines (exc. w/100-amp Alternator or Air Conditioning); 2-pc. Set (Top and Bottom) |
|
CUSTOM-FIT OUTLAND� TAILLIGHT GUARDS Strong 3/4" & 1" tubing High-gloss black powder-coatedguards are .60 wall tubular steel Polished 304 stainless steel guards are .049 wall tubing Unique no-drill side-support clips for most applications The perfect finish for Smittybilt� grille guards and step rails. Includes hardware, instructions. Applications:1998-2002 Dodge Durango |
|
ACCU-FORM MOLDED DASH CAP� For cars and trucks Vacuum-formed plastic with ultraviolet inhibitors won't crack or warp in hot or cold climates Contoured with all necessary cutouts to fit perfectly and easily over dash with no need to remove instruments Includes silicone sealant. Drilling may be required for some vehicles with climate control sensors. Black finish can be painted to match interior. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F arefactory shipped and may take a little longer to reach you. Applications:1982-1986 Nissan Sentra (padded side) right hand |
May we also suggest the following products:
