-
CLICK HERE for more information or to Shop online.
- Hotcoat Powder Corrosion Resistent Primer - 8oz
- Square Drive-to-Drill Chuck Conversion Set
- 2 5/8" 100-250 F Pro-Comp trans temp gauge(E)
- Flapdisc 40 Grit 4 Inch Diameter 5/8 Hole
- Jetstroke Brush 5/8"
- EZ View Clear Plastic Quart Can (10pk)
- Hotcoat Powder Translucent Gold 2 lb
- Devilbiss Finishline HVLP Paint Gun 611102
- 4-1/2in. Surface Prep Wheel 7/8 Arbor ALOX - Fine
- Heavy Duty Anti Rust 13.5 oz
 |
Never Change Points Again - The Ignitor from Pertronix takes the place of standard points and fits under the stock distributor cap. Installs in about 15 minutes! Provides a 2:1 improvement over "point type" systems. Experience reliable ignition performance in all weather and rpm conditions. Increases horsepower, fuel economy and spark plug life. This proven technology has been used in race cars, off road vehicles, back yard mechanics and more for over 25years. Legal in all 50 states and Canada (CARB E.O. #D-57-2). |
 |
Medium Felt Bobs - Hard enough for good cutting action, soft enough to shape to the surface. Sold in 4popular profiles. All bobs measure 3/4" dia., by 1 1/2" tall overall and are mounted on a 1/4" shaft. 15,000 rpm maximum operating speed. |
 |
Accurate hand held 60 PSI Gauge. Retains the last measurement until the pressure is released. Patented designassures accuracy and durability, while a large dial and angled chuck enable easy measuring. |
 |
This kit includes 3/4 hp 3600 rpm motor with 3/4"shaft, 6 compounds, 2 each of the 10" buffs w/ 3/4" hole, face shield, dust mask, gloves, buff rake, buffing instructions and "the art of buffing" video. The baldor pedestal which is included is ideal for working on large pieces. Gives great flexibility around buffer. |
 |
Powerful magnets keep panels, pipes or other parts securely in place during welding,soldering and assembly operations. Shape permits panels to be arranged at 45 deg.,90deg. or 135 deg. angles. Comes with manufacturer's lifetime warranty. Dimensions are 4 1/2"L x 3 1/2" W x 1/2" D. |
 |
2 1/16" 30 InHg Z-Series VacuumGauge(M) |
 |
This soft natural rubber ExpanderWheel conforms to slightly contoured pieces and leaves a smooth, uniform finish. Can be used with abrasive bands, Scotch- Brite belts or the Trizact belts. They stay firmly in place because centrif- ugal force expands the rubber wheel. The Expander Wheel is designed to run at 1,800 rpm so excessive cutting does not occur. DO NOT OPERATE FASTER THAN 2400 RPM!!!!!!!! |
May we also suggest the following products:
