-
CLICK HERE for more information or to Shop online.
- Nylon Tubing 6 ft. 1/8" diameter
- Muscle Gloss 1050 square foot system Light Gray
- Evil Horde Curse of Skullmaster Series
- Reversible Paint Suit Coveralls
- Touring Cycle Cover Motorcycles up to 750cc
- Mustang Lunar Instrument Cluster 4.6L 1999-2002
- Devilbiss Finishline HVLP Paint Gun 611102
- Liquid Electrical Tape Black 4 oz
- Custom Lettering And Pinstriping Techniques Book
- Kwikure Epoxy Primer Activator Pint
 |
This kit allows convenient use of both the Planishing Hammer and the English Wheel. Each can be assembled in less than 30 minutes. Use the English Wheel to form gradual compound curves and high crown radii down to a 2"diameter, fabricate patch panels, and work motorcycle parts and small fenders. Use the Planishing Hammer to smooth large areas of metal, welds and gentle panel crowning. The 22" depth frame features drilled base for easy mounting. A removeable plug permits filling with sand for quieter operation. English Wheel top wheel is 4-1/2" by 1-1/2" wide bottom wheel is about 1-7/8" by 1-1/2" wide. |
 |
Smooth rounded surfaces evenly. Face measures 2 3/4" wide by 16" long. |
 |
Reducer BushingM10x1.25mm |
 |
Eye Catching Finishes for Exhaust Systems - These coatings from Plasti-Kote resist temperatures up to 1500 degrees F. Produces a durable finish that will not Burn Off, Chip or Peel. Designed for use on Headers, Exhaust Manifolds, or any Surface Exposed toVery High Heat. Must be cured by exposing to 600 degrees F within hours of application. 12 Oz net wt. aerosol can covers about 6 square feet with a double coat. |
 |
This anvil wheel is capable of formingthe high crown (down to 4"radius curves). Actual Wheel measures approximately 3" diameter by 2" wide. |
 |
Protectsspark plug boots & wires from extreme temperatures headers and exhaust manifolds up to 1200 degrees F. For use on race cars, street rods, boats & RV's. Eliminates misfires and possible engine damage from burnt wire and boots. Easy to install, fits most boots whether 90รบ or straight. |
 |
HEI ignition systemsrely on a good module and a good coil. The combination of a great module and a great coil makes the Flame Thrower distributor from Pertronix the best. Superior Ignition performance without misfires up to a minimum of 7500 rpm, nearly 3000 rpm higher than most enthusiasts report with their original HEI. Compared to stock HEI units, this one produces 67% more energy in the coil with 45% faster spark breakdown time. Limited One Year warranty. Legal in all 50 states and Canada (C.A.R.B. E.O.#D-57-5).Proudly made in the USA. |
May we also suggest the following products:
