-
CLICK HERE for more information or to Shop online.
- Nylon Tubing 6 ft. 1/8" diameter
- 1968-69 Chrome Whl Mustang Torino Fairlane 15x6
- 94 Minute VHS Instructional Video
- 2 5/8" Triple Gauge cage Ultra Lite Mustang 87-93
- Stretcher With Handle
- Battery Terminal Crimper Heavy Duty
- 90 degree -4AM elbow fitting
- 2 5/8" 30 in vac/20 psi Auto-gage boost gauge(M)
- Round Hole Punch 9/16"
- 2 1/16" 30InHg./15 psi memory Phantom bst gauge(E)
 |
Eastwood Buff Motor - Two speed unit provides versatilityin allowing the user to change buffing speeds without changing buff motors! This 3/4 HP motor allows for selection of 1800 or 3600 RPM operating speed and features a sealed case design for durability. Extended shaft design to reach areas other buffers won't. Operates on 110 VAC with a 6' power cord. Imported. One-year warranty. |
 |
Blackening Detailing Kit - Perfect for blackening steel and iron bolt heads, brackets and linkages in place. Eliminates disassembly. Easy 3 step process. Just clean, blacken and clear coat. Includes 3 oz bottle of Perma Blue blackening solution, Fiberglass Rust Brush (34119) to remove corrosion and other coatings before blackening, Touch-Up Applicators (34112) for mess-free application of the blackening solution, an aerosol can of Diamond Clear Satin for Bare Metal (10300Z) to prevent blackened surface from corroding, and instructions. |
 |
For most GM vehicles from1965 to present. |
 |
Use these Particulate Filters with your 3-M Professional Respirator (34229)or other 3-M 5000, 6000 or 7000 series facepiece. These Particulate Filters are for removing solids from processing minerals, coal, iron ore, cotton, liquid or oil sprays that do not also emit vapors. Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals. Radioactive particulate materials such as uranium and plutonium. Asbestos. Do not use for gases and vapors including those present in paint spray operations, unless combined with approved chemical cartridges. Not for Sandblasting. |
 |
Bleed Brakes/Hydraulic Clutches with Pressure - Pressure works better than vacuum because air is not pulled around the bleed fitting. Eezibleed uses a tire or tank set at 20 psi with the included reservoir bottle to inject fresh fluid into the master cylinder as the system is bled. Fits most imported cars. Can fit any vehicle by modifying a spare master cylinder cap by drilling a 3/8" hole and attaching the pressure/fluid hose with the included hardware. Includes pressurizing hose with tire stem fitting, assorted caps tofit many Lockheed and Girling systems, and instructions. Made in the UK. |
 |
Shrinking Hammer with Wooden Handle - The one inch square face works well for getting into corners. The 1-1/4" round shrinking face pulls the metal in. Made in theUSA. Limited Lifetime Manufacturer's Warranty. |
 |
RaceDeck FloorTile Circle Track Beige |
May we also suggest the following products:
