-
CLICK HERE for more information or to Shop online.
- Legendary Chevys DVD
- 2 1/16" 8-18V Sport-Comp voltmeter
- 2 1/16" Sport-Comp Air/Fuel Ratio gauge
- 2 5/8" 0-15 psi Pro-Comp Fuel press gauge w/is(M)
- Magnetic Tool Tray Round 6" Diameter Stainless
- Pertronix Ignitor Kit Delco 6 Cylinder 54-62 Chvy
- Wet-Dry Paper9x11 50 Pak 600 grit-Sil
- Single Fuel Tank Stand
- Hot Coat Grey Metallic 8 oz
- Soft Lifter Jack Pad
 |
Stainless Steel Locking Ties - Keep exhaust wrap in place with these burr free high grade stainless steel locking ties. Provides afinished look while holding exhaust wraps in place. This kit contains four 14" long ties. For use on pipes up to 4" diameter. Made in the USA. |
 |
Original style steel wheel as used on 1965 Ford Mustang, Fairlane and Falcon Quality accurate reproduction of the original chromed wheel. Wheel size is 14"x5" with the stock 3-3/4" backspace. Configuration is 5-lug with a 4.5 inch bolt pattern. For disc brakeapplications. Made in the USA. |
 |
SheetMetal Bending Brake - Perfect for fabricating small patch panels! bends up to 16 gauge aluminum, 18 gauge steel, heavier gauges in narrower widths. Mounting holes in base to readily attach to your workbench. Made in the USA. |
 |
High quality racer wire with highstrand count of high purity copper. Resistant to high temperature, fluids, and abrasion. |
 |
Freehand Airbrush Templates should be part of every artist's tool box. These Solvent Proof templates feature a wide range of convex and concave curves. Can be easily flexedor curved around odd shaped items. |
 |
These innovative "car dollies" require no floor jack for operation. Simply slip unit around tire, pump the lifting lever to gently squeeze the tire between its two rollers lifting the wheels from the ground. This 1250lb. dolly lifts up to 9" wide wheels. Easily maneuvered in any position with large 4" metal casters. Ratchet mechanically locks CarJack in the raised position, eliminating any hydraulic bleed down or leaks. Handy storage rack (43182) holds units when not in use. ****10 DAYS TO 2 WEEKS DELIVERY**** HEAVY SHIPPING CHARGES APPLY**** |
 |
Just mount the 4" x 6" x 1" thick base in your bench vice and you're ready to bend solid round stock up to 3/8", and square up to 1/2". The stout 7/8" diameter 16" long handle makes bending easy. Included dye assortment produces 3/8", 3/4", 2", 3", and 4" diameterbends. Coils and bends wires of many sizes too. Made in the USA. One Year Limited Manufacturer's Warranty. |
May we also suggest the following products:
