-
CLICK HERE for more information or to Shop online.
- Iridescent Colors Sample Kit
- 1968-69 Chrome Whl Mustang Torino Fairlane 14x7
- 2 1/16" 0-1600 F Phantom Street pyrometer kit(E)
- Hotcoat Powder Grape Flake 8 oz
- Accuspray 18 Hvlp Gun With Cup
- Motorcycle Gas Tank - Part I & II DVD Format
- Brake Caliper Coating Gray Aerosol 12 oz
- Hotcoat Pro Model 1100 System
- Buff Compound Tripoli 13 oz Tube
- Blast Media Aluminum Oxide 50 lb
 |
DELCO ALTERNATOR PIGTAIL #30706 - A replacement pigtail using the factory original plug for the popular "Delcotron" alternator. Pigtail comes pre-terminated with the ignition input wireand the voltage sensing wire. |
 |
This specially formulated Rust Remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reacheseven inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Rust Remover can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable. This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting. |
 |
Super-hard carbide burrs used in a high-speed die grinder can really make a tough job easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. Allburrs have a 1/4" dia. shank. Burr sets include: cylinder, pointed tree shaped and round nose. Individual burrs are available separately. Use these above burrs for Steel and Iron. Use (46060) 6" Tree Shaped Burr for Aluminum. |
 |
This Tach Adapter allows users to connect a tachometer, shift light, or RPM activated switch to their distributorless ignition system (Including 1999 and newer Ford Mustangs). The unit senses the current going through the positive coil source wire, then converts that information into a 12-volt square wave signal that can be read by Auto Meter tachometers and accessories. The tach adapter is compact and completely potted with polyurethane for vibration and water protection. The unit wires easily inline on the coil positive 12-voltwire, ground wire, and the tach output wire. |
 |
Used with some Pro-Compand some Sport-Comp tachometers. |
 |
Includes Model VL Double-action Airbrush, 3 nozzles (1,3,5), 3 needles, 1/4 oz. color cup, one 3 oz. and two 1 oz. paint bottles, 6' of compressor-matched air hose,a copy of 22 lesson airbrush guide, and airbrush compressor. |
 |
Apply massive loosening force withthe cam action of this impact driver. Easily frees rusted or frozen screws, nuts and bolts while avoiding the common problem of "rounding out" the fastener head. 1/2" drive body may be used with #2 or #3 Phillips, 8mm or 10mm wide slot bits, or attach your own impact socket. A simply hammer strike to the tool body forces the loosening action in either a left or right-hand direction. Chrome vanadium material. |
May we also suggest the following products:
