-
CLICK HERE for more information or to Shop online.
- 2 1/16" 0-1600 F Phantom Street pyrometer kit(E)
- Muscle Gloss 1050 square foot system Light Gray
- 2-1/16" 100-340 F Ultra-Lite oil temp gauge(E)
- 2 1/16" Gauge Angle Rings (3 pack)
- 2 5/8" 0-100 psi Phantom oil press gauge(M)
- Abrasive Blasting Cabinet Gloves
- Exhaust Wrap (Black)2"x 50' Roll
- Cross-Peen Finishing Hammer, Fiberglass Handle
- Steering Wheel Remover Lock Plate Compressor Set
- Super Pro Stud Welder w/Shoot Suit Stud
 |
Original styleOldsmobile SS-1 Wheel with black outer portion. Quality accurate reproduction of the original. Wheel size is 15"x7" with 4-1/4" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible with disc brake applications. Requires trim rings. Made in the USA. |
 |
Cut around spot welds without drilling through both layers of metal. The 3/8" arbor hasan adjustable pilot to set depth of cut to prevent weakening lower panel. Long-lasting, heavy-duty cutters have three large cutting teeth. Tool shaft is hex-shaped so it won't slip in your drill chuck (limit is 900 rpm). Tool comes with 3/8" cutting head. 1/2" cutting head (#19052) is available separately. |
 |
Original style all chrome Oldsmobile SS-2 andSS-3 Wheel. Quality accurate reproduction of the original. Wheel size is 15"x10" with a customer specified 4-1/2" to 6" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. This is a special order wheel and is not returnable.Compatible with disc brake applications. Made in the USA. |
 |
Authenticreproduction of the original Mustang Magnum 500 center cap. |
 |
Pack a set of larger sized 2-5/8" mechanical gauges in your street machine! Auto gage(R) puts the power of performance in your dash with these bold 270deg"full sweep" instruments, giving you maximum visibility under the most demanding conditions. All of the individual gauges include an optional chrome plated bezel that snaps on to add sparkle if desired. The Fuel Pressure gage reads 0-15 PSI Requires braided stainless steel tubing & mounting cup. Gauge must be mounted outside of vehicle for safety. |
 |
The set of 4 Steel Nozzles 5/16" require 20 cfm at 80 psi. Most 2 stage compressors will work with this nozzle. Not recommended for use with direct drivecompressors. Includes 4 nozzles, one air jet, and washer. |
 |
Made with heavy-duty, all steel construction. The clamping system has two threaded hold downs with easy to turn handles. It is easily adjusted for different metal thicknesses and can be totally removed for closetight reverse bends like rocker panels. Brake will bend 20 gauge metal the full 36" width, heavier gauges in lesser widths. Long 13 1/2" handles with vinyl grips provide plenty of leverage to make bending easy. Rugged steel frame has mounting holes for bolting to your bench or to the specially designed stand. |
May we also suggest the following products:
