-
CLICK HERE for more information or to Shop online.
- SHIMRIN Solid Color Bases Black Quart
- 2 5/8" 0-100 psi Carbon Fibr fuel press gauge(M)
- Reflective Aluminum Aerosol 11.3 oz
- Panel Clip Removal Pliers
- High Temp Silicone Plugs 1/2 - 11/16 10/pack
- Complete Firepower Weld System
- Nylon Washer Natural 3/16" ID 20/pk
- Engine Lift Brackets One Pair
- Gun Cups With Lids For Model 1100 Hot-Coat Gun
- Mig Welding Wire Flux Core.035 2 lb
 |
TubingFlaring Tool 1/2" Adapter |
 |
MityVac Evacuator Plus - Uses a hand operated pump to either evacuate or dispense oil, transmission fluid, gear oil, coolant brake fluid and more. Draining fluids through fill or dip stick openings picks up more sludge and is more convenient than gravity draining. The MityVac Evacuator Plus features 8.8 liters (2.3 gallons) capacity with automatic shut offto prevent overfilling. Includes Reservoir/Pump Unit, 40" hose, two 34" dipsticktube extensions (1/4" and 3/16") and instructions. Made in the USA. |
 |
3-3/8"190 kph In-Dash Carbon Fiber Speedo(E) |
 |
Body Work Starter Set - Here's an inexpensive way to get started doing your own panel straightening. This 7-piece kit in molded plastic caseincludes 3 hammers with most popular profiles and fiberglass handles, and 4 dollies including curved, general purpose, heel, and double end hand dolly. One year limited manufacturer's warranty. Made in China. |
 |
Painting in enclosed areas? Don't take chances with your lungs. Hobbyair and Citation Systems pump a steady flow of fresh, outside air into paint booths and other confined work areas for maximum protection against isocyanates,vocs, par- ticulates and other toxins. The Hobbyair is designed around a reliable 2-stage turbine. It provides breathing air to a full or half face mask through a 40ft kink-resistant FDA approved hose.It's lightweight, silicone rubber face masks are FDA approved as well. Has beltline hookup and snap-tight fittings. |
 |
Gloss Chassis Black produces an 85% Gloss for a customlook with superior protection. It is specially formulated from a tough modified epoxy base to resist chips, corrosion, and temperatures up to 300 degrees F; covers 8 sq.ft. (up to 4 times faster than similar sized aerosols), average sized car uses just 3 to 5 cans for the entire chassis! Works great over bare metal or Eastwood Rust Encapsulator. NOT RECOMMENDED for use over SINGLE STAGE SELF-ETCHING PRIMERS. Buy 3 or more and save! |
 |
Nu-Tecsys PlasmaCutter Replacement Nozzle |
May we also suggest the following products:
