-
CLICK HERE for more information or to Shop online.
- Hotcoat Powder Corrosion Resistent Primer - 8oz
- Flap Disc 60 grit 7in Dia 7/8in Hole Alum Zirconia
- No Mess Handi Packer Bearing Packer
- Lettering Quill #8 Brown
- 1 Shot Pearlescent Paint Dark Magenta 1/2 Pt
- Diamondite Glass Cleaning System
- Magna Clamp
- Solder Paddle P33 Round
- Chevy Rally Wheel Paint Set
- Electronic Ignition Video
 |
Designed to work in conjuction with your engine leveler andhoist to make the job easier. They have 1/2" hole on the engine end and a 1" hole on the hoist end. Heavy-duty metal; 7" long. |
 |
Citation Turbine System with Bottom Feed Gun And Half Mask Hood - The CITATION 4T HVLP system is a professional quality spray system with a built-in Supplied- Air Respirator that offers safe cool breathing air to a user working in a toxic environment as in a paint booth. Included with this system is adual pump unit powered by 110 volts, 2 - 40' airline hoses, a 4' long whip hose, quick connect and air control fittings. Also included is a comfortable 'positive pressure' halfmask with a pull-over hood for complete head protection. The spraygun that we include with the CITATION system is the Accuspray Model 10G Bottom Feed gun. |
 |
10 Piece Mini Plier Set - Perfect for working on springs, linkages, wiring harnesses, gauges and much more. Pliers measure 4" to 5-1/2" long overall. Includes2 diagonal cutters, 1 end cutter, 3 bent needle nose pliers, 3 straight needle nose pliers, and 1 flat nose plier in a durable zipper case. Imported. |
 |
Jewelers Torch Tip #4 |
 |
Our Bench-Top powder booths are complete open-faced spray systems. Features 18 gauge galvanized construction, a 3 stage filter panel, including exhaust filter and grids,powder coat pocket filters and final stage filters for non-vented exhaust. Over sprayed powder collects on the primary filters until full, then filters are replaced. The stand features all welded 1-1/2" angle iron construction at a comfortable 36" height. Only minor assembly required. Please see the Standard Tools Ship Chart for Shipping Charges for thisitem. |
 |
Here's a new approach to flanging patch panel areas. This tool uses two gear-driven rollers, which can be adjusted to accommodate steel or aluminum from 24 to 18 gauge. To turn the rollers,simply attach your ratchet wrench and 5/8" socket. The hex drive turns a gear that interlocks with the rollers. Very smooth action creates a tight-stepped flange. Made from drop-forged steel with heat treated gears. Handles are 11" long. Made in England. |
 |
These 270deg "full sweep" gauges feature a quality engineered bourdon tube design and durable, performance grade movements for unsurpassed accuracy under the most demanding conditions. Includes 6 ft. nylon tubing, 1/8" &1/4" NPT fittings. |
May we also suggest the following products:
