-
CLICK HERE for more information or to Shop online.
- Square Drive-to-Drill Chuck Conversion Set
- High Temperature Fiberglass Masking Tape 1/2"
- Jewelers Torch Kit For Acetylene
- Portable Sprayer Replacement Bottle
- Abrasive Blasting Cabinet Gloves
- Buff Motor 3/4 hp 1800RPM
- Devilbiss Finishline HVLP Paint Gun 611102
- SHIMRIN Graphic Kolors Molly Orange Quart
- Tubing Flaring Tool 1/2" Adapter
- 60 Pc Sae/Metric Tap& Die Set W Drill/Tread Chart
 |
This 600 watt element is used toreplace any burned out elements in the Infrared Cure System. |
 |
Onepair 12" tongs with tips. |
 |
1/4" Compression to 1/8" NPT connector fitting and mating 1/8" NPT weld fitting. For use withItem Nos. 74813 and 74814 probes. |
 |
RaceDeck Floor Tile CircleTrack Red |
 |
The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted, pitted surfaces. The Standard Kit consists of twenty 80 grit abrasive cylinders and ten each of grit tapers, 120 grit cylinders and 120 grit tapers. Two mandrels are alsoincluded. THe Deluxe kit adds a carbide bead burr for faster cutting, to remove casting flash or shape the metal for a custom look. After the metal is smoothed, apply one of our high temperature coatings: your rust-prone manifold will keep that brand new look for years! Instructions incl. |
 |
This Replacement Punch fits the (28096) Air Nibbler. It is desirable to replace both the punch and die to restore optimal performance. See (28096B) forthe Replacement Die. |
 |
Renew or change the color of your vinyl upholstery and plastic surfaces - permanently. Flexible enough for seats, yet tough enough for vinyl tops. For optimum results and adhesion, use Plastic Prep and Sand Free-Kit on hard plastics, andVinyl Prep on vinyl. Buy 3 or more and SAVE! |
May we also suggest the following products:
