-
CLICK HERE for more information or to Shop online.
- Wiring Harness-for use w/models ATM-9150/ATM-9160
- Single Fuel Tank Stand
- Buff Motor 3/4 hp 1800RPM
- Eastwood Pinstripe Video by Eddie Paul
- Color Outliners Set Of Three
- Motorcycle Gas Tank - Part I & II DVD Format
- Vinyl Coat White Aerosol 13 oz
- Mini Buff 2" Yellow Treated
- Multimeter ATD5540
- 2 1/16" 100-250 F Carbon Fibr trans temp gauge(M)
 |
Kosmic Klears UC-35 is a medium solids clear and may be used to topcoat any urethane enamel finish, including all SHIMRIN base coats.Dries fast and hard and may be color sanded and buffed next day. UFC-35 FLO-KLEAR is a lower solids Klear which may be used to topcoat any Kosmic Kolor urethane or polyurethane enamel finishes, or any of the SHIMRIN base coats. UFC-19 KOMPLY KLEAR II is a 1.9 VOC polyurethaneclear coat with application properties of low solid clear coats, is 33% solids as applied and features excellent gloss, long flow out, and very good chemical and water resisitance. |
 |
2 1/16"100-250 F Z-Series oil temp gauge(E) |
 |
One 12 lb spool of.023" type 70S-6. |
 |
Features anodized blue exterior, and many unique features specifically designed for sprint cars and other forms of racing. The luminescentdial glows at night for dimly lit tracks when no battery is available to light up conventional gauges. A sealed, water-resistant case keeps moisture and debris out for easy cleaning. These gauges are for racing purposes only, and will not operate properly in a street driven vehicle. (6 ft. capil.) Gauge includes a 1/2" NPT aluminum fitting. |
 |
Themost important tool to any pinstriper is a good striping brush. Hand made of choice 100% camel hair. Ferrules are treated with special adhesive to keep bristles from pulling out. Round handle lets you easily roll the brush on tight corners. The 2" bristles load well for long lines. Brushes come in plastic storage tubes. Stripes in six sizes from 1/8" to 1/2" wide. |
 |
You'll be amazed at howeasy it is to pop out minor dents in panels. Handy set of three Suction Cups for dent pulling. All rubber composition with release tabs. Sizes for every job: 2-1/4" with single-finger grip, 3-1/4" two-finger grip & 3-1/4" Grifter hand grip. Great assist for dinging dents. Also aids in holding window glass in position while working on regulators. Will grip any smooth non-porous surface firmly. |
 |
Hotcoat Powder Appliance White 2 lb |
May we also suggest the following products:
