-
CLICK HERE for more information or to Shop online.
- Kustom Painting Secrets-VHS
- 10 Gauge Red TXL Wire (25 ft.)
- Vehicle Cover Bag Deluxe Dark Taupe
- 4" Cordless Rechargeable Polisher Kit
- 2 1/16" 0-90 Ohms Carbon Fiber fuel gauge(E)
- Ford Magnum Wheel Mustang Torino Others 15x8
- Accuspray 18 Hvlp Gun With Cup
- SHIMRIN Graphic Kolors Molly Orange Quart
- 2 1/16" 100-250 F Carbon Fibr trans temp gauge(M)
- GM Steering Column and Dimmer Switch Pigtails
 |
Just install and attach your buff and you're ready to start buffing. Thread is 1/2" x 20. Use right-hand arbors on shafts that turn counter-clockwise and left-hand arbors on shafts that turn clockwise. |
 |
Wood Slappers are used to form aluminum and steel over a shotbag or one of the forming heads. These Wood Slappers are constructed from hard maple and are sealed with a urethane coating. The wide range of curved surfaces provides a variety of shaping options. The leather face provides more gentle shaping. |
 |
Polypropylene beveled RaceDeck corners and edging provide a finished look to your RaceDeck floor. Complete the floor installation with theappropriate RaceDeck beveled edges and corners. 10 year limited manufacturer's warranty. Made in the USA. |
 |
The beauty of stainless steel trim is that it does not pit or corrode, but over the years it can get scratched. This Kit can return this trim to like-new condition. Includes three Buffs (Sisal, Spiral Sewn, Loose Section); three Buffing Compounds (17.75 oz. Emery, 17.75 oz. Stainless, 16 oz. White Rouge); and 8 page instruction booklet. Will also work on non-stainless steel parts. Enough to buff the trim onmost cars and trucks. |
 |
Original style Oldsmobile SS-1 Wheel with black outer portion. Quality accurate reproduction of the original. Wheel sizeis 15"x8" with 4-1/2" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. Compatible with disc brake applications. Requires trim rings. Made in the USA. |
 |
These professional-grade cutters will totally drill-out spot welds, with little or no grinding required tofinish the job. Make fast, clean cuts without cutting into the bottom skin. This solid one-piece cutter is machined from M2 tool steel. The self-centering point prevents "drill walking". Extremely durable and long-lasting - shop-tested at over 300 cuts without re-sharpening. The 3/8" diameter cutter applies to most applications; the 1/2" diameter cutter is especially needed for trucks and convertibles. Drill at 700 - 2,000 RPM. |
 |
High grade tool steel Reamers are great for cleaning up or precisely enlarging holes in sheet metal. Small Reamer ranges 1/8-1/2". Large Reamer covers 5/32- 7/8". They offer long life atan affordable price. Buy both! |
May we also suggest the following products:
