-
CLICK HERE for more information or to Shop online.
- Auto Upholstery & Interior Book
- Motor Adaptor 5/8 Inch Left Hand Thread
- 2-1/16" 100-340 F Ultra-Lite oil temp gauge(E)
- Sanding block 5 in Long
- LED Strip-Red
- 2 1/16" 8-18v Z-Series Voltmeter
- Infrared Replacement Element
- Custom Lettering And Pinstriping Techniques Book
- Tubing Flaring Tool 1/2" Adapter
- Oxy Acetylene Welding Video Volume 4 of 4
 |
LED STRIP - RED #80222 - LEDs generate zero heat and can be used in close quarters with plasticlenses. No filament to burn out. Extremely bright bulbs solve the problem of brake light visibility on custom vehicles. For use as a third brake light. Light measures 5" long by 3/4" wide by 1/2" high. |
 |
Horns as aForm of Self-Expression - The Airsplitter Air Horn features dual chrome trumpets to produce a 118-db blast that's sure to get attention. All horns are designed to be used with 12-volt electrical systems. |
 |
This tool produces spot welds very similar to those used when your car was built, and joins panels without the need to grind off weld beads. Spot welding is also fast, avoids distortion and confines heat. The spot weld gun attaches easily to your home arc welder set at 60 amps or less; simply connect the spot welder's cord to the electrode holder on your welder, ground as you normally would. Use the trigger to touch the electrode until a molten puddle of metal is formed. Then pull the trigger upto break the arc. Each electrode provides approx. 60-100 welds. Two electrodes are included. |
 |
Gasket Cleaning Pad Replacement Mandrel |
 |
Abrasive Paper50Pk 2 And 3/4 By 17 And 1/2 36Grit |
 |
Great for customizing aluminum underhood parts such as water pumps, performance intake manifolds, etc. Also returns brass household goods back to their original, rich luster. Includes two Buffs (Spiral Sewn and Loose Section); twotubes of Buffing Compound (12.75 oz. Tripoli and 16 oz. White Rouge); and 8 page instruction booklet. Also great on magnesium parts. |
 |
Engine turning, or damascening, has long been the hallmark of fine automotive craftsmanship. This technique leaves metal surfaces with a swirled pattern, really setting off your vehicle. Great forany flat polished metal surface - firewalls, valve covers, dashboards. Either of these two kits will allow you to customize your vehicle with this process using specially formulated abrasive rolls and your drill press. Two kits are available: the 1" Kit con- tains two 1" diameter rolls and mandrel; the 1/2" Kit contains two 6" long rolls, which yield six 2" working rolls. Complete instructions included. |
May we also suggest the following products:
