-
CLICK HERE for more information or to Shop online.
- Hi-Temp Paint 16oz Aerosol Red
- Buick Rallye Wheel - Small Bolt Pattern 14x6
- Muscle Gloss 1050 square foot system Light Gray
- 2-1/16" Dual Pod Honda Civic 1992-95 C Fiber 2/3D
- Square Drive-to-Drill Chuck Conversion Set
- 2 5/8" 140-280 F Carbon Fiber trans temp gauge(M)
- Universal Fuel Level Sender
- Hotcoat Powder Grape Flake 8 oz
- Airbrush Kit Professional
- 2 1/16" 100-250 F Carbon Fibr trans temp gauge(M)
 |
Use the Right Masking Tape - Hardware store tape can leave adhesive behind and lift when paintis applied, leaving overspray on trim and a rough parting line. 3M Green Tape is preferred by professional refinishers for superior hold and easy removal. The 20 Piece Mixing and Straining Set (34240) helps assure even paint consistancy. |
 |
Includes Panel Flanger (31092) and DimplingPliers (31089). |
 |
The Rivet Puller fits under the head of the Trim Rivets (31041D) to pull dents where thetrim is fastened. |
 |
Tight tolerance axial self-locking pliers provide an ingenious solution that is ideal for clamping patch panels or complex shapes in areas where limited access is a problem. Originally intended for use in welding, axial locking pliers use the locking lever principal to apply strong clamping pressure to panels or other objects. The Angled jaw design is especially useful where applying high leverage toa small spot is desirable. Beautifully plated handles with powder coated jaws assure years of service. Limited one year manufacturer's warranty. Imported |
 |
Create exciting metallic effects with this iridescent finish! The effect is accentuated when used over dark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the most dramatic effect) and cure only long enough to flowout the powder. DO NOT COMPLETELY CURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA. |
 |
Unibody vehicles can't be safely lifted with conventional floor jacks - says who? With this Floor Jack Pad Adapter you can safely lift Unibody vehicles with a regular floor jack, without damaging pinch welds, mis-aligning body panels, or damaging suspensioncomponents. Adapter's U-channel lifts vehicles at the correct factory-designated lift points. To use, simply remove the saddle insert from the floor jack and insert the pad adapter. Fits jack saddles with 5/8" or 1 1/8" holes (with bushing included). |
 |
Prem. Performance Terminal Assortmnt Kit (84 pcs.) |
May we also suggest the following products:
