-
CLICK HERE for more information or to Shop online.
- Hotcoat Powder Corrosion Resistent Primer - 8oz
- Protect A Boot XL 8 Inch Silver 2 Pack
- 2-5/8" 30 In/Hg Carbon Fiber vacuum gauge(M)
- 2 1/16" Gauge Angle Rings (3 pack)
- Vehicle Cover Bag Deluxe Dark Taupe
- 2 5/8" 0-100 psi Phantom oil press gauge(M)
- Hard Copper Rectangle
- Floor Pan Repair Video
- Hot Coat Grey Metallic 8 oz
- Gun Cups With Lids For Model 1100 Hot-Coat Gun
 |
Lab Metal the Filler Preferred by Powdercoaters - Lab Metal is a ready- to-use metal reinforced leveling agent that can be drilled, buffed,or tapped. Readily adhere's to virtually any clean surface. No catalyst needed so it's easy to apply. Use the Lab Solvent to smooth the Lab Metal to a glass smooth surface to minimize sanding. |
 |
Reaching over a radiator to open and close a petcock, especially a rusty one, can be a real belly-buster, as well as a knuckle-knocker. Simplify the task with this petcock socket. Two-slot design matches most types of petcocks for radiators,engine blocks, air compressors, storage tanks, etc. Requires a 1/4" drive ratchet or 7/8" wrench. |
 |
The Chassis & Running Gear video features techniques to systematically restore front andrear suspension components. This 95 min video also includes rear axle and transmission repair. |
 |
MUSTANG NITROUS HIDE-A-PANEL FOR1987-97 (ROCKER) #50422 - Looking to conceal your nitrous capability? This ashtray mount panel is ideal for 5.0L racers and includes three lighted on/off rocker switches and one momentary switch for purge function. Comes fully assembled and complete with mounting hardware. Fits 1987-97 5.0L or 4.6L Mustangs. |
 |
Block Sand High Crown Fenders - Ridged block sanders make incomplete contact on high crowned fenders and body panels creating flat spots. These 21" sanders work with your standard 2-3/4" wide pressure sensitive adhesive sheet abrasive to form the most versitile sanding tool available! Stainless faceplate is embedded into the urethane foam body. Removing any or all of the threerods encased in the handle adjusts the flexibility of your sander to maintain complete surface contact on flat or curved surfaces. Made in the USA. |
 |
Foot Pedal Kit converts bench top cabinet and other trigger gun cabinets to footpedal control. (Includes foot pedal, gun, hoses, and pickup tube.) |
 |
Mityvac Brake Bleed Pump Rebuild Kit |
May we also suggest the following products:
