-
CLICK HERE for more information or to Shop online.
- Nylon Tubing 6 ft. 1/8" diameter
- 2-1/16" Triple Pillar Dodge Ram 1994-97
- Chevy Police Wheel Center Cap
- 2-1/16" Dual Pod Nissan 240 SX 1995-98 (RHD)
- Kosmic Glo Powder Pink 4 oz
- Abrasive Blasting Cabinet Gloves
- Battery Terminal Crimper Heavy Duty
- Nozzle Ceramic Set 1/4 Inch
- Blast Media Aluminum Oxide 50 lb
- Sanders Set Of 2 Flexible Board And Half Sheet
 |
Pertronix Flame Thrower High Performance Ignition Coils - Maximise spark voltage with this 40,000 volt performance coils. Works great with your stock or Ignitor electronic ignition. This 3.0 Ohm canister style oil filled coils are also available in 3.0 Ohm black (70072). Use the black to maintain a stock look.Legal in all 50 states and Canada CARB E.O. #D-57-10. Made in the USA. 90 day manufacturer's warranty. Use the (70046) Zinc Plated or (70047) Chrome Coil Bracket with this coil. |
 |
Resin backed and last 3 times longer than standard sandpaper. Safe up to 22,000 rpm. Grind and polish castings, port heads, and finish small parts. Arbor hole is 1/8" use only with mandrels listed. Note: different sizes and grits available. 80 grit (coarse), 120 grit (medium), 240 grit (fine) 320 grit extra fine. When working on aluminum or other soft metals, use Grinder's Grease for a smooth cut. Save by ordering the Tight Spot Grinding Kit or order different size and grits individuallyfrom chart. |
 |
Carbon Fiber Welding Blanket - Softas velvet, tough enough to withstand temperatures up to 3000 degrees F! Great when welding or grinding near interior/exterior trim and glass. Anti-Heat Compound (31042) one quart, can be used adjacent to the weld to prevent heat distortion. |
 |
Protect Paint, Glass, and Shop Equipment from Welding and Grinder Sparks - White hot metal from welding and grinding operations can pit and damage paint finishes as well as glass. Save the clean-up headaches with this heavy duty welding blanket. Non-asbestos, tough fiberglass construction features Kevlar seamed edges. A must when doing spot repairs and touch-ups! Made in the USA. |
 |
2-1/16" TriplePillar Mazda RX7 1993-95 |
 |
Panel Separating Knife Even after you've drilled out spot welds, separating panels can be tough. With Eastwood's new "Smacker-Whacker" simply insert the heavy-duty Sheffield steel blade between the panels and lightly hammer the blade back to gently wedge the panels apart (or smack it there, and give it awhack!) 8 3/8" overall length. |
 |
ilPressure 0-100 PSI. Includes 1/8" electric sender and 1/4" NPT adapter. |
May we also suggest the following products:
