-
CLICK HERE for more information or to Shop online.
- 2 1/16" 1979-93 Mustang black dual gauge pod
- Chevy/Caddy HEI Distributor Tune Up Kit Red Cap
- Chevy Police Wheel Center Cap
- Buff Wheel 10" Yellow Spiral With 1/2" Hole
- Round Hole Punch 1 Inch
- Solder Paddle P33 Round
- Headliner Dark Blue
- Gun Cups With Lids For Model 1100 Hot-Coat Gun
- Super Pro Stud Welder w/Shoot Suit Stud
- Delco Alternator Pigtail
 |
Lighted Button Head Bolts from DEI - These are 12 V straight lighted bolts made from high grade stainless steel and polished to a mirror finish. The light shines brightly through the hex head opening. They can be used for many applications: gauge lights, indicator lights, underhood lights, accent lights etc. They are 5/16" x3/4" polished stainless steel button head bolts and are sold in pairs. Made in the USA. |
 |
Depth Adjustable Pneumatic Spot Weld Drill - The Spot Annihilator features an innovative patented design that allows you to set the depth while it applies the correct amount of pressure. Rotating "C" clamp can be removed easily to gain access to inside corners. 1/4" NPT air fitting, requires 4 cfm at 70 psi. Includes in-line oiler, one10mm and two 8mm titanium coated drill bits, oil, adjustable air inlet, and instructions in a durable molded case. Imported. One year manufacturer's warranty. |
 |
LED Shift-Lite is a replacement option for Auto Meter tachometers with the larger size light. This unit can also be used as a shift light when combined with the Auto Meter Pro-Control or any other rpmtrigger. Gain the unsurpassed brightness and performance of LED! |
 |
Special metal-working belts for gentle grinding and polishing. Long lasting. Size is 1 1/2" x 18 15/18". Use with Grinder's Grease(13119) for a smoother cut on steel or when leveling aluminum or other soft metals. |
 |
Our Striping and Lettering Enamel is designed for striping, lettering, and air brush artwork. It features high pigmentation, low solids for a minimal edge and long open time. Apply over existing finishes or topcoat with clear for a smooth,durable finish. Our Striping and Lettering Enamel may betop coated with acrylic lacquer, urethane enamel, acrylic enamel and alkyd enamel. Use straight out of the jar mixed with U-00 (85012ZP) Reducer and then topcoat clear; or (when striping is NOT to be cleared over) mix with Kosmic Catalyst KU-200 (85011ZP) before reducing. |
 |
RaceDeck Floor TileFree Flow Graphite |
 |
Natural, woven fiber covered with cotton and spiral sewn.Used for steel, iron and stainless metals. Sisal is fast cutting and aggressive. Use with Emery Compound. |
May we also suggest the following products:
