-
CLICK HERE for more information or to Shop online.
- 2-1/16" Triple Dash Pod Beetle 1998-2000
- 3M Hookit Conversion Face 5" Backing Pad
- 2 5/8" 0-100 psi Pro-Comp oil press gauge(E)
- 2 5/8" 140-280 F liquid Ultra-Lite oil temp(M)
- Fibreglass Rust Brush Replacement Tips 2 Pk
- Trunk/Floor Repair Kit
- Auto Probe Portable Infrared Thermometer
- 2 1/16" 7000 rpm American Platinum Tach(E) blk ndl
- 2 1/16" 140-280 F Lunar water temp gauge (M)
- Oldsmobile SS1 Wheel 15x7
 |
Cordless 4" Buffer - Make chip and scratch repairs with this versatile 4" buffer. Kit includesone rechargable 4.8 V battery, charger, 4" foam applicator pad, 6" foam polishing pad, 4" lambs wool pad, scrubber, 3 sanding discs and instructions. 2 year limited manufacturer's warranty. Made in China. Please allow 10 days for delivery. |
 |
LiquiVac Oil Changing System - Change engine oil, transmission fluid, radiator coolant and more without getting under your car, boat, or lawn tractor. LiquiVacuses a 54" long narrow (1/4" OD) tube to vacuum fluids through dip stick tubes. Removes more sludge from sumps than draining through the drain plug too. Includes 8-quart capacity reservoir, hand powered vacuum pump, necessary hoses and clamps, and complete instructions. Made in the USA. |
 |
At Last! High temperature powder for header and exhaust manifold applications! We're pleased topresent this range of 4 High Temperature Exhaust System coatings similar in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to 1000 degrees F and offer superior durability when compared to brush and spray-on coatings. Must be applied to clean bare metal. For best results abrasive blast and spray with PRE Painting Prep (10041Z) or acetone. Do not use over surfaces pretreated with any product that leaves a phosphate coating like Oxisolv or Metal Wash. |
 |
All HotCoat Powders are exclusively formulated for the HotCoat System. They are optimized topromote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net wt. cans. |
 |
When split seconds count you only have a fraction of that time to monitor your instruments. Ultra-Lite Full Sweep electric gauges are designed for the professional racer. 270 degree dial face provides the ultimate in clear visibility when you need it most. Gauges have the finest in high-end sending units for unsurpassed accuracy and dependability. They stand up to the pressure and you stay cool! Works with most OEM and aftermarket oxygen sensors, if sensor is needed - see item no.74179. Uses a type K thermocouple. Requires purchase of probe. |
 |
Never Change Points Again PLUS - The Ignitor II offers the same easy, under the distributor cap, installation as the original Ignitor mentioned above with3 times more available energy between 3000-5000 rpm, and nearly doubles available plug voltage. Legal in all 50 states and Canada (CARB E.O. #D-57-2). |
 |
At Last! High temperature powder for header and exhaust manifold applications! We're pleased to present this range of 4 High Temperature Exhaust System coatings similar in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to 1000 degrees F and offer superior durability when compared to brush and spray-on coatings. Must be applied to clean bare metal. For best results abrasive blast and spraywith PRE Painting Prep (10041Z) or acetone. Do not use over surfaces pretreated with any product that leaves a phosphate coating like Oxisolv or Metal Wash. |
May we also suggest the following products:
