-
CLICK HERE for more information or to Shop online.
- ROLLING CAR JACK STORAGE RACK
- Devilbiss Finishline HVLP Gravity Feed Gun 611103
- KOSMIC Kolor Thinners High Gloss Gallon
- 2 5/8" 60cm/2 Kg/Cm2 Sport-Comp vac/bst gauge (M)
- Ford Magnum Wheel Mustang Torino Others 15x8
- 90 degree fitting for press gauges #4 S.S. line
- 2 5/8" 0-100 psi Carbon Fibr fuel press gauge(M)
- 2 1/16" 140-280 F Phantom water temp gauge(M)
- Hot Coat Grey Metallic 8 oz
- 2 1/16" 100-250 F Carbon Fibr trans temp gauge(M)
 |
Brightly Colored Silicone Vacuum Hoses - Add visual interest under the hood. Each Underhood Detailing Kit includes: the following lengths of hose 10' of 3.5mm, 15' of 4.0mm, 6' of 6.0mm, and 4' of 8.0mm and a hose cutter, slitter, pk. of 30ties, Hose Techniques stickers and instructions. |
 |
Oil Pressure 0-100 PSIIncludes 1/8"electric sender and 1/4" NPT adapter. |
 |
Pertronix Flame Thrower High Performance Ignition Coils - Maximise spark voltage with these 40,000 volt performance coils. 1.5 ohm primary reistance Works great with Ignitor electronic ignition and many stock ignitions. Compatible with blade or eyelett primary connections. These canister style oil filled coils are available in chrome (70026) or black (70024). Use the black to maintain a stock look. Legal in all 50 states and Canada CARB E.O. #D-57-10. Made in the USA. 90 day manufacturer's warranty. Use the (70047)Chrome Plated Coil Bracket with this coil. |
 |
Gauges include 1/8"and 1/4" NPT fittings along with 6 ft. nylon tubing. |
 |
This inner shaft fits the (13328) Pro Craft Hanging Motor. This inner shaft can be used with original outer sheath if condition is good. For a replacement outer sheath order(13328 OS). |
 |
Aluminized Plug Wire Sheaths 4 Pk. - Made from the same material as Heat sheath the plug wire sheath was designed as an inexpensive way to protect ignition wires and plug boots that run close to exhaust manifolds and headers. TheAluminized Plug Sheaths can also be used on lines, wires and hoses. Each Sheath measures 3/4" diameter by 6" long. |
 |
Just install and attachyour buff and you're ready to start buffing. Thread is 1/2" x 20. Use right-hand arbors on shafts that turn counter-clockwise, and left-hand arbors on shafts that turn clockwise. |
May we also suggest the following products:
