CLICK HERE for more information or to Shop online.
2 1/16" 120-240 F Sport-Comp water temp gauge(M)
 |
WaterTemp. 120-240deg F (12 ft. tubing)
SKU: 74451 Category: Auto Accessories and Gifts
|
Buff Wheel 10" Yellow Ventilated 3/4" Hole
 |
Faster Cutting, Longer Lasting Treated Buffs - Our new line of treated buffs work faster, longer than non-treated buffs. Suitable for faster material removal, these wheels take the place of standard and ventilated buffs. Used with Stainless Steel Compound (13001)or Tripoli Compound (13135). Great on hard or soft metals!
SKU: 13232 Category: Metal Buffing & Finishing Buffing Buffs
|
4 Switch NOS 3 Stage Rocker Switch Panel
 |
4 SWITCH NITROUS 3 STAGEROCKER SWITCH PANEL #50604 - Set up for nitrous safely and efficiently! The four lighted on/off rocker switches control main power plus 3 nitrous stages. The main power switch is protected with a 30 amp fuse, while the 3 staging switches have 15 amp fuses. Includes an output wire for purge functions and an output for WOT relay. The brushed aluminum panel is prewired with 10 feet of lightweight, high temp TXL wire.
SKU: 60189 Category: Performance and Tune-Up Electrical & Diagnostic Switch Controls
|
Magnetic Vise Jaw Pads w/Grooves
 |
Molded rubber magnetic pads give a secure yet safe grip on fragile parts of any shape. But these 4 1/2" long units also have verticle, horizontal and 45 degree grooves-perfect for holding tubing for cutting or bending.Great with our #43073 soft vise pads on page 53.
SKU: 43166 Category: Tools & Equipment Shop Tools Unique Tools
|
Round Hole Punch 13/16"
 |
Round HolePunch 13/16"
SKU: 28027 F Category: Metal Shop Fabrication Punching
|
3/16 " Air Riveter
 |
Air Powered Rivet Gun - Use this 3/16" capacity rivet gun for fast fatique free rivet installation. Requires about 2 cfm at 90-120 psi. Includes 3/16", 5/32", 1/8",and 3/32" nose pieces. Works great with our 1/8" Steel (31019) and Aluminum (31020) Countersunk Rivets. Imported. 90 Day Limited Manufacturer's warranty.
SKU: 31152 Category: Auto Body Body & Fender Body Tools & Accessories
|
Headliner-Light Bluew/Adhesive
 |
Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foam backed headliner material measuring 4' 5" wide by 6' long (enough for mostcars), 2 dome light clips, instructions on the box, and a 19.04 fluid oz. aerosol can of spray adhesive.
SKU: 52221 A Z Category: Styling-Care-& Custom Styling Custom Interior
|
May we also suggest the following products:
- Tiger Hair
- 1965-66 Mustang Center Cap
- 2 5/8" 140-280 F Carbon Fiber trans temp gauge(M)
- Mini Buff 1" Yellow Treated
- #0 Torch Tip
- Economy HVLP Air Touch-Up Paint Gun
- Devilbiss Finishline HVLP Paint Gun 611102
- Contingency Decals
- Mig Welding Wire Flux Core.035 2 lb
- Oxy Acetalene Shank for Henrob Torch
|
|