-
CLICK HERE for more information or to Shop online.
- 94 Minute VHS Instructional Video
- 1 Shot Paint Blue Green 1/2 Pt
- Devilbiss Finishline HVLP Gravity Feed Gun 611103
- Tubing Flaring Kit ISO Set
- 2 5/8" Carbon Fiber Mounting Cup for (M) gauges
- 3M 3/4 inch 233 plus Masking Tape Green
- 90 degree -4AM elbow fitting
- Hot Coat Grey Metallic 8 oz
- High Speed Mandrel For Abrasive Rolls 1/4"x2 3/4"
- 9 1/2" Cable Cutting Pliers
 |
Original style Chrysler Rallye Wheel with large bolt pattern as used on Mopar vehicles. Quality accurate reproduction of the original. Wheel size is 14"x7" with a 4-1/8" backspace. Configuration is5-lug with a 4.5 inch bolt pattern. Compatible with disc brake applications. Made in the USA. |
 |
Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foam backed headliner material measuring 4'5" wide by 6' long (enough for most cars), 2 dome light clips, instructions on the box, and a 19.04 fluid oz. aerosol can of spray adhesive. |
 |
The Metal Prep and Rust Repair video shows how to get panels to bare metal and properly finished. Shows proper pick and file techniques that will minimize the use of fillers. VHSformat 55 minutes by Kevin Tetz. |
 |
Fast Sanding Body Filler - This general purpose light weight polyester body filler is excellent for applyingthin skim coats of filler over larger areas. Contains additives to promote adhesion to galvanized steel, aluminum, SMC, E-Coats, and bare steel. Hattonite helps assure fast easy sanding. Top coat the leveled filler with Eurosoft Glazing Putty (31079ZP) and/or primer before applying color coat. Contains.8 gallon with 2.75 oz hardener. |
 |
3' ShiftLite Extension wire with connectors |
 |
Using your 1/16" drill bit, you can drill safety wire holes through the shafts of bolts and through thesides of nuts. Nut Jig accepts nuts up to 3/4" in diameter. |
 |
Just install and attach your buff and you're ready to start buffing. Thread is 1/2" x 20. Use right-hand arbors on shafts that turn counter- clockwise,and left-hand arbors on shafts that turn clockwise. |
May we also suggest the following products:
