-
CLICK HERE for more information or to Shop online.
- 1 Shot Pearlescent Paint Set Of Ten
- ECL2001 BCS - BOTTLE FEED SET
- Auto Upholstery & Interior Book
- Chevy/Caddy HEI Distributor Tune-Up Kit (Blk)
- KOSMIC Kolor Thinners High Gloss Gallon
- 3 3/8" 10000 rpm In-dash Carbon Fiber Tach(E)
- Buff Wheel 8 Inch Canton 1/2 Inch Hole
- Hotcoat Powder Teal 2 lb
- Reflective Aluminum Aerosol 11.3 oz
- 2 1/16" 140-280 F Lunar water temp gauge (M)
 |
Plastic Bottle used with the UndercoatingSystem. |
 |
Straight Offset Snips - Cuts straight or gradual curves to the right or left in up to 18 gauge stainless steel. Offset blades keep users hand above and away from sharp edges. Start cutting from edge or in the middle of a panel with a 3/8" starter hole. Drop forged blades and grade 8 center pivot bolt. Compound leverage eases cutting actions. Comfortable soft plastic handle grips. Limited lifetime manufacture's warranty. Madein the USA. |
 |
Professional Grade TINTABLE Bedliner - This durable urethane textured bedliner can be tinted with most paints to closely match the color of your vehicle. Simply mix color of choice with gallon of bedliner to achieve desired shade, catalyze and spray with any undercoating gun. Drys in 8 hours, ready for use in 48 hours. Includes enough materials to coat most 8 foot truck beds: 1 gallon of bedliner, 1 quartof catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, application gun and complete instructions on the label. |
 |
Brake Line Bender - Align, bend, and adjust, 3/16" and 1/4" brake and fuel lines with a twist of the wrist. Whether fitting new hard lines ordecreasing the bend radius next to a fitting, this tool is indispensable. 9" long forged tool with vinyl grips. Shaped jaws bend tubing without distortion. Imported. |
 |
The Mityvac lets one person successfully bleed brakes at the wheel, without depressing the pedal or wasting fluid. This versatilelittle pump moves about 1 cu. in. of fluid with each stroke, pulling out dirt, old fluid, and air. It develops and holds approximately 25 inches of vacuum. Kit includes pump, brake bleeding adapter package user's manual, 3 lengths of 1/4" I.D. tubing (1 1/2", 3", and 18"), 3" of 5/32" tubing and reservoir jar with transfer and storage lids. |
 |
New or a classic, any Harley-Davidson motorcycle should be protected from extended exposure to dirt, heat, moisture, and ultraviolet rays. Covercraft's Custom-Fit Cover for Harley-Davidson motorcycles includes steel cable reinforced grommets, heat shield, soft liner at windshield and fender area, and a free storage bag! For "Sportster" Type Bikes, 883 & 1200 -- will accommodate all stockSportster models. In Black Urethane. |
 |
Original style steel wheel as used on 1965 FordMustang, Fairlane and Falcon Quality accurate reproduction of the original chromed wheel. Wheel size is 14"x6" with the stock 4" backspace. Configuration is 5-lug with a 4.5 inch bolt pattern. For disc brake applications. Made in the USA. |
May we also suggest the following products:
