-
CLICK HERE for more information or to Shop online.
- 2-1/16" Triple Dash Pod Beetle 1998-2000
- Pinstriping And Vehicle Graphics Book
- Rocker Switch Momentary On Non-Lighted Black
- Drive Tip-.152 Diameter Tip for ATM-5260 Sender
- Lettering Quill #8 Brown
- Buff Goblet Tapered
- Round Hole Punch 1 Inch
- Hotcoat Pro Model 1100 System
- Liquid Electrical Tape Black 4 oz
- Hotcoat 3-Tier Powder Rack
 |
Variable Height Tool Stand - Adjustable from a 24" to 42" top surfaceheight to provide an ideal working level for optimal comfort. Generous 12" X 12" heavy gauge steel top plate has multiple 1/2" wide slots to accept a wide range of bolt patterns. For mounting stand mount tools such as buff motors, shrinker stretcher, interchangeable English Wheel/Planishing Hammer, metal shear, table top drill press and many others. May be filled with sand to absorb unwanted noise and vibrations. Bolting to floor recommended. Made in the USA |
 |
Use 74410fuel level sender (not included). |
 |
Heat Sheath Aluminized Sleeving from DEI- Protect wiring, fuel and brake lines, and other areas from heat up to 500 degrees F. Made from high temp aluminized fiberglass fabric sewn into a tube. Reflects up to 90% of the heat. Made in the USA. |
 |
Marblizer artistic bases offer you an exciting new paint finish. A wide range of effects can be achieved using this unique coating, from a deep marble appearance to a snake skin appearance. Many other effects are open to the innovative painter.Use two colors for increased depth or apply Kandys for awesome effects. Marblizers are universal base coats that may be cleared for a final finish, or used as a base coat for Kandys. Due to their unique chemistry make-up, they may be top-coated with either acrylic lacquer or urethane enamel. No mixing required. Apply over Black Base 8513ZP. |
 |
Muscle Gloss 2000 squarefoot system Beige |
 |
Safer Stripper - Want to get away from Methylene Chloride and still remove tough urethane, epoxy and powder coatings? Then Eastwood DeKote is the answer. Available in aerosol, qt., gal, 5 and 55 gallon drums this paint remover will not harm steel, aluminum, pot metal die cast, fiberglass and SMC panels. The longer dwell time (30 minutes to 3 hours) means itdoesn't work as fast as Methylene Chloride based strippers but it provides time for the remover to penetrate multiple coats. Available in quart,and gallon containers as well as 5 and 55 gallon drums for easy brush-on or dip application. |
 |
3-3/8"160 mph Z-Series Speedometer (M) |
May we also suggest the following products:
