-
CLICK HERE for more information or to Shop online.
- Hotcoat Powder Argent Silver Base 10 lb
- Metal To Metal Filler 1 Qt w/ Hardener
- Touring Cycle Cover Large sport bikes 1000cc
- Battery Terminal Crimper Heavy Duty
- 2 5/8" 30 in vac/20 psi Auto-gage boost gauge(M)
- 2 5/8" 0-100 psi Carbon Fiber oil press gauge(E)
- Mig Welding Wire Solid Core.023 2 lb
- 2-5/8" 100-250 F Sport-Comp oil temp gauge(E)
- Paint Mixing Cup Set 13 pc
- Cold Galvanizing Compound Aerosol 14 oz
 |
Panel Holding System Compression Pliers |
 |
Electric gauges provide a no-nonsense installation and are the perfect choice to be used with Gauge Works mounting accessories. The above Temperature gaugesinclude a 1/8" electric sender, 3/8" and 1/2" NPT fittings. |
 |
You can remove all vinyl pinstriping, graphics, and adhesive residue without damaging the paint. Simply mount the eraser in your air drill (recommended speed is 3,500 to 4,000 rpm) and safely remove all the old body striping in minutes. Unlike chemicals and solvents commonly used for this job. The soft wheel is gentle to the finish. Not recommended for acrylic lacquer orplexi- glass. |
 |
Sturdy leveler makes engine removal and replacement a one-person operation. Engine angle can be adjusted from either end during the operation with a 11/16" socket or wrench. Rugged beam is constructed of 1/2" diameter steel plate and features 1/2" ACME threaded rod andall-welded link chain. Unit boasts a 1500 lb. rating. |
 |
The Best Penetrating Oil Available - Try Kroil on stubborn rusty hardware. After trying the rest, we think you too will like Kroil best. Available inGallons or convenient 16.5 ounce Aerosol (43381Z). |
 |
HIGH BEAM HEADLIGHT RELAY KIT (1999 AND UP) #30821 - GM's four headlight system turns low beams off when highs are selected. Kit keeps all four headlights on when high beams are selected, increasing intensity and improving light spread pattern. For 1999-2002 GM full-size trucks and SUVs. NOTE: If your head-light wires areTan and Green see Item# 60111, if Purple and Yellow use Kit #30821). |
 |
Bronze Metallic is a hybred Epoxy/Polyester blend with a bonded metallic additive to assure a uniform finish. Cures at 400 degrees F (204 degrees C) for 20 minutes after flow-out (that transition from dry powder to a liquid look) occurs. Produces a smooth 80-90% high gloss finish. May be topcoated with (10093) Gloss Clear or (10286) Super Gloss Clear forimproved UV resistance, gloss and increased depth. |
May we also suggest the following products:
