-
CLICK HERE for more information or to Shop online.
- 10 Gauge Red TXL Wire (25 ft.)
- Reducer Bushing M10x1.5mm
- 2 5/8" 140-280 F Ultra-Nite water temp gauge(M)
- Stripping Disc 7"
- Airbrush Kit Professional
- Mig Welding Gloves Flexible Leather
- Replacement bulb and socket for 1 1/2" gauge
- 9 1/2" Cable Cutting Pliers
- Oxy Acetalene Shank for Henrob Torch
- Sanders Set Of 2 Flexible Board And Half Sheet
 |
2 5/8" 60cm/2 Kg/Cm2Sport-Comp vac/bst gauge (M) |
 |
These innovative "car dollies" require no floor jack for operation.Simply slip unit around tire, pump the lifting lever to gently squeeze the tire between its two rollers lifting the wheels from the ground. This 1250lb. dolly lifts up to 9" wide wheels. Easily maneuvered in any position with large 4" metal casters. Ratchet mechanically locks Car Jack in the raised position, eliminating any hydraulic bleed down or leaks. Handy storage rack (43182) holds units when not in use. ****10 DAYS TO 2 WEEKS DELIVERY**** HEAVY SHIPPING CHARGES APPLY**** |
 |
Remove Rusty Hardware Quickly - The Shake-N-Break works with your air hammer at low pressure to break the rust bond, while handle permits leveraged turning of the seated bit. This is one of those tools you have to try to believe how great it works! Perfect for stubborn screws that hold striker plates, moldings, headlight doors and more. Works with standard 5/16" hex bits or the LEFT-E bit (for use on damaged hardware). Includes Shake-N-Breaktool to mount in your air hammer, and 1,2,3,4 phillips, and instructions. Can be used with optional 5/16" LEFT-E Bit (43332). Ltd. Lifetime Man. Warr. (bits are considered consumable). |
 |
A clean supply of fuel is critical to the performance of your vehicle - hard starting, stumbling under load, and sluggish response may be symptoms that your car's fuel system is dirty. The best way to ensure that the fuel is clean is to be certain that the fuel tank is free of rust. ThisGas Tank Sealer Kit seals minor leaks and can save you a great deal of time and money in trying to locate a replacement tank. For metal tanks up to 20 gallons. Kit contains one 7 oz. can of Metal Wash, 1 pint of rust remover, two 16 oz. bottles of Gas Tank Sealer. Tank Tone (10030Z) resembles the original finish. |
 |
No shielding gas gas required with flux core wire. For best results clean weld thoroughlyto prevent paint blistering. |
 |
Primes and levels all at once! As a primer it prevents bleed-through of fillers and as a surfacer fills minor pits. Won't shrink, sands easily (wet ordry), and is compatible with any top coat system. Easy spray-on application using your spray gun. Clear liquid hardener included. Requires.070 fluid nozzle and needle in standard spray gun or.051 in Accuspray HVLP Gun. |
 |
Heavy-Duty Quality Dent Pulling System. This unit utilizes a wider range of draw pins for greater versatility. Includes heavy-duty Magna Spot 1500 stud welding gun, heavy-duty twist-to-lock slide hammer, 3 electrodes, 500 2 mm draw pins, 150trim rivets, and a convenient molded carrying case. 5 year manufacturer's warranty. |
May we also suggest the following products:
