-
CLICK HERE for more information or to Shop online.
- Silver Rust Encapsulator 128oz(Gallon)
- Square Drive-to-Drill Chuck Conversion Set
- 2-1/16" Triple Pillar 300 ZX 1990-96
- 2 5/8" 0-100 psi Phantom oil press gauge(M)
- Stud Welder Shrinking Electrode Tip
- Detail Silver Aerosol 12 oz
- Solder Paddle P33 Round
- Round Hole Punch 9/16"
- KOSMIC Top Coat Clears Kosmic Poly Klear Quart
- 4'x 21"Floor/Tunnel Heat & Sound Insulation
 |
Quills for professional quality work. Made from squirrel hair. Brown are softer than the gray. Brushes come inplastic storage tubes. Imported |
 |
Cold Galvanizing Compound is formulated of 90% pure zinc. It chemically fuses to bare steel forming a permanent barrier. Even if scratched, the zinc will deter rust from starting. Acts as a great weld-through coating: ideal for treating the inside surfaces of new replacement body panels which willnot be painted, but need superior, long-lasting protection from rust. NOT TO BE USED AS A PRIMER OR PAINTED OVER. Buy 3 or more and SAVE! |
 |
An extremely flexible wheel for color buffing. Gives very slight cutting action and is great for hard-to-reach surfaces. Made of fine weave cotton discs joined by one circleof sewing around the arbor hole. Buff is 40 ply. Use with White Rouge or Plastic Compound. |
 |
These Forming Heads will allow you to produce compound curves appropriate for motorcycle and automotive fenders,gas tanks, patch panels and more. Sand-cast from malleable iron for long term creativity. Can be used "as is" of finished with your sander to smooth or customize the shape. The high crown working face of the Fender Maker Motorcycle Forming Head measures 9" long by 4" wide by 2" deep. Square mounting stake measures 6"long with radiused corners tapers from 2 1/4" to 1 3/4", can be droppedinto a 2" square hole in a workbench, piece of square steel tube or mounted in a vice. Average weight 24 lbs. |
 |
3-1/8" 120 MPH Mechanical SpeedometerIncludes odometer and trip odometer. |
 |
SteeringWheel Puller |
 |
Usethis optional 3/4" adapter to extend the Drill Doctor's capabilities to includes sizes over 1/2" to 3/4". |
May we also suggest the following products:
