CLICK HERE for more information or to Shop online.
Tubing Flaring Kit ISO Set
 |
Fabricate double-compression lines (brake) or single-compression lines (fuel, etc) in steel, aluminum, or copper. Not recommended for stainless or tubing walls thicker than.040". This set handles 4.75, 6, 8, and 10 mm O.D. tubing. Limited 1Year Maunfacturer's Warranty.
SKU: 49004 Category: Performance and Tune-Up Brakes & Suspension Brake Tools
|
Hotcoat Powder Silver Vein 5 lb
 |
For weatherability and fade resistance topcoat with 10286 Gloss Clear.
SKU: 10213 5LBS Category: HotCoat Powder Coating Powders Textured Colors
|
2-1/16" Triple Pillar Acura RSX 2002-03
 |
2-1/16" TriplePillar Acura RSX 2002-03
SKU: 75379 Category: Performance and Tune-Up AutoMeter Pods
|
2 1/16" 0-1600 F Lunar Pyrometer temp gauge(E)
 |
Includes probe and 8' of thermocouplewire.
SKU: 74575 Category: Performance and Tune-Up AutoMeter Lunar
|
15 feet Racers Wire 10 Ga Red
 |
High quality racer wire withhigh strand count of high purity copper. Resistant to high temperature, fluids, and abrasion.
SKU: 74170 Category: Performance and Tune-Up Electrical & Diagnostic Bulk Wire-Connectors-and Terminals
|
Hotcoat Powder Iridescent Amethyst 8 oz
 |
Create exciting metallic effects with this iridescent finish! The effect is accentuated when used overdark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the most dramatic effect) and cure only long enough to flow out the powder. DO NOT COMPLETELY CURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA.
SKU: 100 10323 Category: HotCoat Powder Coating Powders Iridescent Colors
|
Heavy Duty 1/4 hp Air Brush Compressor
 |
Professional Studio Quiet Compressor - This durable, "studio quiet" oil-less diaphragm air compressor is ideal for home, office, studio or workshop. It is the workhorse of the Paasche Air Compressor line. Designed for use with any airbrush anddelivers up to approximately 40 lbs. of pressure. Equipped with a six foot 3 wire cord and on/off switch. Requires 115 VAC, 1 phase, 60 cycle, 1/4 hp, 4.9 amps, and delivers.5 CFM @ 20 PSI.
SKU: 37161 Category: Auto Body Pinstriping/Airbrushing Airbrushing
|
May we also suggest the following products:
- 1 1/2" 0-15 psi Sport-Comp blk face presure gauge
- 2-5/8" 30 In/Hg Carbon Fiber vacuum gauge(M)
- Headliner - Black
- Color Match Cards
- Rivets - Steel Countersunk box/500
- Ford Magnum Wheel Mustang Torino Others 15x10
- Powdercoating 4 Tapeinstruction Video'S & Handbook
- Muscle Gloss 450 square feet system Dark Gray
- Headliner Dark Blue
- Mig Welding Wire Flux Core.035 2 lb
|
|