-
CLICK HERE for more information or to Shop online.
- Gas Tank Sealer One Pint 16 oz
- Air Operated File
- High Temperature Fiberglass Masking Tape 1/2"
- 1 Shot Pearlescent Dark Green Met 1/2 Pt
- 6 Piece Sanding Block Kit
- Leadwork And Plastic Fillers Video
- 2 1/16" 0-15 psi Sport-Comp Fuel press gauge(M)
- Abrasive Paper 50Pk 2 And 3/4 By 17 And 1/2 240 Gt
- Oldsmobile SS1 Wheel 15x7
- 1-1/2" 0-100 Autogage oil press gauge (M)
 |
When split seconds count you only have a fraction of that time to monitor your instruments. Ultra-Lite Full Sweep electric gauges are designed for the professional racer. 270 degree dial face provides the ultimate in clear visibility whenyou need it most. Gauges have the finest in high-end sending units for unsurpassed accuracy and dependability. They stand up to the pressure and you stay cool! Includes 1/8" NPT sender and 8' wiring harness. |
 |
Here are 2 essential tools when forming coated tubing: rolling action tubing bender (3/16" and 1/4" O.D.) and heavy-dutytubing bender (5/16" and 3/8" O.D.) for thick walled tubing. Both utilize a free-rolling follower CAM to minimize stretching and distortion. Will not harm protective surface coating on fuel and brake lines. Comes apart easily for easy placement over long pieces of tubing. Made in England. |
 |
Authentic reproduction ofthe original Torino/Ranchero Magnum 500 spinner cap. |
 |
When installing seals and bearing races, it is critical to drive them in correctly. If not driven in perfectly square, seals could leak and bearings can fail prematurely. Includes six easily changed discs and an aluminum drive handle. Use the flat side of thediscs to drive seals, use the tapered side to drive races. |
 |
Inspection Mirror - Inspect under vehicle areas, wheel arches, confined underhood areas and more with this3-1/2" diameter illuminated mirror with 3x magnification. Folds to a compact 17" long, 24" fully extended. |
 |
2-1/16" Single Pod Nissan SkylineGTR 91-94 (RHD) |
 |
The 1 1/2 hp 3600 rpm motor with 7/8" shaft works very well with the Baldor pedestal. The pedestal is ideal for working on large pieces givingyou greater flexibility around the buffer. |
May we also suggest the following products:
