-
CLICK HERE for more information or to Shop online.
- Vinyl Coat Landau Black Aerosol 13 oz
- No-Rosion Coolant Additive 64 oz
- 2 1/16" 0-15 psi Carbon Fiber fuel press gauge(M)
- 2 5/8" 0-100 psi liquid Ultra-Lite oil press (M)
- 35 pc Torx Bit Master Set 3/8, 1/4 Drive
- Floor Pan Repair Video
- 2 5/8" 140-340 F Ultra-Lite water temp gauge(M)
- 2 1/16" 12v Quartz Clock Old Tyme Wht blk needle
- Economy HVLP Air Touch-Up Paint Gun
- 1 Shot Pearlescent Process Green Met 1/2 Pt
 |
SHIMRIN Universal Pearls(PC) are base coats that may be cleared for a final finish, or used as a base coat for Kandys or Pearls. Due to their unique chemistry make-up, they may be top coated with either acrylic lacquer or urethane enamel. These Pearls are most commonly used over BC-25 (8513ZP 001 QT) Shimrin Black Base or BC-26 (8513ZP 002 QT) Shimrin White Base. |
 |
The Cobalt Series features a black dial face, anodized bezel, white numbering, and blue accents. At night, an explosion of Cobalt blue light shines through the dial and into any interior scheme, from stock toshock. A glowing red gauge pointer provides clear contrast and visibility. Lit using LED technology, the Cobalt Series offers a lifetime of super cool lighting. Includes 1/8" NPT sender. |
 |
Original style powdercoated Chevelle SS style Wheel. Quality accuratereproduction of the original. Wheel size is 14"x7" with 4-1/4" backspace. Configuration is 5-lug with a 4.75 inch bolt pattern. This wheel requires trim rings. Made in the USA. |
 |
Egg Shaped Dolly - Unique high crown shape with a variety of curves and angles. Measures 1-5/8" x 2-1/2" x 3-3/4". Weighs3.1 lbs. |
 |
Create exciting metallic effects with this iridescent finish! The effect is accentuated when used over dark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the most dramatic effect) and cure only long enough to flow out the powder. DO NOT COMPLETELYCURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA. |
 |
Threaded Steel Inserts Poly-Nut1/4-20 pack/40 |
 |
il Pressure 0-100 PSI. Includes 1/8" electric sender and 1/4" NPT adapter. |
May we also suggest the following products:
